You can 3D print your own Audiomatica microphone stand adapter. The adapter has a 5/8” standard thread and fits Audiomatica MIC-01, MIC-02 and MIC-03 microphones. We suggest to print with 0.1 mm resolution and 100% infill.
In this application note we show the possibility to test the playback of an Android device through Android Debug Brigdge (adb) without the need to root the device or install a vendor specific test application.
We published a two part application note where we introduce a proof-of-concept CLIO 12.5 QC application to test a seven microphone array and speaker which is typically used in smart devices such as Amazon Echo or Google Assistant. Testing Smart Devices with CLIO 12.5 – Part I Testing Smart Devices with CLIO 12.5 – Part … Read more
Audiomatica is pleased to publish a new interesting paper written by Joe D’Appolito on subwoofer design: “Model-Based Active Equalization of Closed-Box Subwoofers”.
Last Monday Apple released its newest macOS 10.15 Catalina which dropped support for 32 bits applications and strengthened the security requirements for applications distributed outside their App Store.
CLIO pocket is a 32 bit application, thus is not compatible with MacOS 10.15 Catalina.
https://support.apple.com/en-us/HT208436
macOS 10.14 Mojave is the last macOS which supports 32 bit applications and the highest macOS version supported by CLIO pocket 2.0.
Audiomatica will exhibit at the 147th AES Pro Audio Convention.
The Convention will be held at the Jacob Javits Convention Center in Manhattan, New York, from October 16 through October 19.
Please come to visit us at our booth #450.
From June 29th to 30th, the first CLIO Pocket training class was held in Guangzhou as scheduled. We are thrilled to share these photos with you!
We are thrilled to share these photos from Clio Training in Bangkok, dated May 16-17, 2019. Our local dealer Mr. Andreas Tjahadi is doing a great job!
We just released Windows 10 WHQL Drivers for our CLIO FW-02 (CLIO 12) and CLIO CP-01 (CLIO pocket) hardware. With these drivers, which are digitally signed directly by Microsoft, there is no need to disable the Secure Boot option of the PC BIOS. These drivers should be used ONLY with Windows 10. Drivers are available from our … Read more
We just published a Technical Note which addresses a situation where the CLIO software is not able to detect the QCBox Model 5 device even if its driver installation apparently succeeded. If you experienced a “QCBox Model 5 is not present!” even if the device is properly connected and the device driver installed, please follow … Read more