CLIO Pocket – Audiomatica Digital Technologies

Software release 3.1

CLIO Pocket Brochure
CLIO Pocket Depliant

CLIO Pocket Survival Guide
CLIO Pocket Manuale di sopravvivenza

CLIO Pocket microphone Accessories

Windows and OSX compatibility

CLIO Pocket helpful reviews

CLIO Pocket is a powerful but lightweight portable measurement system.

CLIO 12/13/14 vs CLIO Pocket comparison

The system is composed of multi-platform CLIO Pocket software, CLIO CP-01 Audio Interface hardware plus accessories.

The CLIO CP-01 Audio Interface uses an USB 2.0 connection for maximum portability and compatibility with current and future computer hardware architectures.

If you are using CLIO Pocket 1 or 2 and would like to udpgrade, please click here:

TECHNICAL SPECIFICATIONS

CP-01 AUDIO INTERFACE
GENERATOR
24 Bit sigma-delta D/A Converter
Frequency range:	1Hz-45kHz
Frequency accuracy:	better than 0.01%
Frequency resolution:	0.01Hz
Output impedance:	150 Ohm
Max output level (Sine):	13dBu (3.46Vrms)
Attenuation:	0.1 dB steps to full mute
THD+Noise(Sine):	0,008%
AC ANALYZER
24 bit sigma-delta A/D Converter
Input range:	+40 ÷ -40dBV
Max input acceptance:	+40dBV (283Vpp)
Input impedance:	64kOhm (5.6kOhm mic)
Phantom power supply:	8.2V
DC ANALYZER
12 bit A/D Converter
Input range:	± 6.5V
MISCELLANEOUS
Sampling frequencies:	96kHz and 48kHz
Connections:	analog RCA in and out
Digital connection:	USB 2.0 port
Power supply:	USB powered (480 mA)
Dimensions (cm):	9(w)x12(d)x2.5(h)
Weight:	0.3 kg
MIC-02 MICROPHONE
TYPE	Condenser Electret
Accuracy (direct field)	±1 dB 20Hz÷10KHz, ±2 dB 10÷20KHz
Maximum level	130 dB SPL
Sensitivity (average)	13mV/Pa
Dimensions	8mm diameter, 12 cm long

The CLIO Pocket software has been designed with a multi-platform engine which allows the software to run under Windows and OSX.

CLIO POCKET SOFTWARE

CLIO Pocket software sports a new redesigned interface with modern and easy to use feel.

CLIO Pocket has a powerful set of features:

Self calibration of CLIO CP-01 hardware
Impulse Response analysis using LogChirp stimulus: possible application are anechoic frequency response measurement of transducers, impedance measurements, distortion measurements
FFT analysis with powerful trigger functions
RLC meter with component selection functions
Thiele and Small parameters calculation with Rdc reading
Waterfall CSD and Cycle Wavelet analysis

	CLIO Pocket 1.0	CLIO Pocket 2.2	CLIO Pocket 3.1
System
macOS Catalina and upward compatibility		×	×
Log Chirp Analysis
Amplitude, frequency and time calibrated IR	×	×	×
2nd, 3rd and THD harmonic response		×	×
Phase and group delay response	×	×	×
Time Impulse, step, Schroeder decay, ETC response	×	×	×
Math processing: Merge, dB Shift, MIB	×	×	×
Math processing: Add, Subtract, Divide by file	×	×	×
Math processing: Add, Multiply by value		×	×
Math processing: LP, HP, BP filters		×	×
Math processing: Divide by file for impedance			×
Save Impulse time data to .wav file		×	×
AutoStore to Overlay function (10 curves on screen)	×	×	×
OVERLOAD and LEVEL LOW automatic detection			×
Export ASCII or Excel data to file or clipboard		×	×
Enhanced distortion data export			×
Auto Dist Remove time window			×
Dedicated Hot Keys to facilitate measurement inspection		×	×
AutoSave function with automatic file name generation		×	×
Dedicated procedure and controls for executing polar measurements sets		×	×
FFT and RTA Analysis
Narrow-band FFT analyzer	×	×	×
Real-Time fraction-of-octave analyzer (RTA)	×	×	×
Programmable event and OneShot trigger	×	×	×
Bar Graph with Max Hold display			×
Save acquired time data to .wav file	×	×	×
Export ASCII or Excel data to file or clipboard		×	×
AutoStore to Overlay function (10 curves on screen)		×	×
AutoSave function with automatic file name generation		×	×
Internal Tigger			×
Signal generator and output controls
Computer Audio Devices Playback Control			×
Dedicated panel with on-the-fly controls	×	×	×
Plays standard .wav files	×	×	×
Highly Optimized waveform calculator	×	×	×
Direct 3-digit input of output level	×	×	×
Button control for 1dB and 0.1dB steps	×	×	×
Continuous Sweep with manual control			×
Input meter and controls
Input Record function			×
Free running Voltmeter and Sound Level Meter	×	×	×
Integration time: Slow, Fast, Impulse	×	×	×
A-Weighting filter	×	×	×
C-Weighting filter		×	×
THD reading: % and dB		×	×
THD+N reading: % and dB			×
Frequency reading with 0.1 Hz resolution		×	×
Current reading: A, dBAmpere			×
Interactive LCR meter	×	×	×
L,C,R % readings for easy components selection		×	×
User Interface
Graphics title display			×
Recently Opened files history			×
Waterfall
Decay analysis with 3-D gesture-controlled graph	×	×	×
Color map 3D and 2D display		×	×
Selectable color map shading		×	×
Powerful 3D marker inspection		×	×
Classical Cumulative Spectral Decay	×	×	×
Wavelet Cycle Decat for detailed decay analysis		×	×
Polar plots
Circular Polar Plots		×	×
Half Polar Display		×	×
Thiele and Small parameters
Free Air Parameters	×	×	×
Added Mass or Known Volume methods for full parameters	×	×	×
Direct measurement of ReDC	×	×	×
External Hardware Control
Support for Open Source Audiomatica Turntable		×	×

CLIO Pocket system is supplied complete with accessories to start to get electro-acustics measurements on the go or in the laboratory, inside the box you find:

The CP-01 audio interface
The CLIO Pocket SD card with software and drivers
The microphone MIC-02
One USB 2.0 cable
One RCA to RCA 2.7m long microphone cable
One RCA to alligators impedance cable

PRODUCT IMAGES