{"id":2998,"date":"2021-06-14T09:47:06","date_gmt":"2021-06-14T08:47:06","guid":{"rendered":"https:\/\/www.audiomatica.com\/wp\/?p=2998"},"modified":"2024-09-17T09:33:05","modified_gmt":"2024-09-17T08:33:05","slug":"diy-microphone-stand-adapter","status":"publish","type":"post","link":"https:\/\/www.audiomatica.com\/wp\/?p=2998","title":{"rendered":"DIY microphone stand adapter"},"content":{"rendered":"\n

You can 3D print your own Audiomatica microphone stand adapter. <\/p>\n\n\n\n

\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n<\/figure>\n\n\n\n
\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n<\/figure>\n\n\n\n

The adapter has a 3\/8” standard thread and fits Audiomatica MIC-01, MIC-02 and MIC-03 microphones. <\/p>\n\n\n\n

We suggest to print with 0.1 mm resolution and 100% infill. There are two parts to print, a 3\/8 threaded base and the microphone holder. Please note that the hole in the microphone holder part is not completely open and should be finished by drilling using a 3 mm drill bit. To complete the assembly you will also need an M3 nut and an M3 – 10 mm flat head screw. <\/p>\n\n\n\n

Please fill the form below to receive the .STL files (registered<\/a> system only will be processed):<\/p>\n\n\n\n

\n
\n

<\/p>

    <\/ul><\/div>\n
    \n
    \n<\/fieldset>\n

    Please answer to validate the form (required):<\/b>\n<\/p>\n

    \n<\/p>