• CLIO Pocket

    Software release 2.1


    CLIO Pocket Brochure 
    CLIO Pocket Depliant  (0.99MB pdf file) flag_it_16

    CLIO Pocket Survival Guide 
    CLIO Pocket Manuale di sopravvivenza (4.79MB pdf file) flag_it_16

    CLIO Pocket microphone Accessories 

    Windows and OSX compatibility 

    CLIO Pocket helpful reviews

    Clio Pocket is a powerful but lightweight portable measurement system.

    The system is composed of multi-platform Clio Pocket software, Clio CP-01 Audio Interface hardware plus accessories.

    The Clio CP-01 Audio Interface uses an USB 2.0 connection for maximum portability and compatibility with current and future computer hardware architectures.



    24 Bit sigma-delta D/A Converter
    Frequency range: 1Hz-45kHz
    Frequency accuracy: better than 0.01%
    Frequency resolution: 0.01Hz
    Output impedance: 150Ohm
    Max output level (Sine): 13dBu (3.46Vrms)
    Attenuation: 0.1 dB steps to full mute
    THD+Noise(Sine): 0,008%
    24 bit sigma-delta A/D Converter
    Input range: +40 ÷ -40dBV
    Max input acceptance: +40dBV (283Vpp)
    Input impedance: 64kOhm (5.6kOhm mic)
    Phantom power supply: 8.2V
    12 bit A/D Converter
    Input range: ± 6.5V
    Sampling frequencies: 96kHz and 48kHz
    Connections: analog RCA in and out
    Digital connection: USB 2.0 port
    Power supply: USB powered (480 mA)
    Dimensions (cm): 9(w)x12(d)x2.5(h)
    Weight: 0.3 kg


    TYPE Condenser Electret
    Accuracy (direct field) ±1 dB 20Hz÷10KHz, ±2 dB 10÷20KHz
    Maximum level 130 dB SPL
    Sensitivity (average) 13mV/Pa
    Dimensions 8mm diameter, 12 cm long

    The Clio Pocket software has been designed with a multi-platform engine which allows the software to run under Windows and OSX.


    Clio Pocket software sports a new redesigned interface with modern and easy to use feel.

    Clio Pocket has a powerful set of features:

    – Self calibration of Clio CP-01 hardware

    – Impulse Response analysis using LogChirp stimulus: possible application are anechoic frequency response measurement of transducers, impedance measurements, distortion measurements

    FFT analysis with powerful trigger functions

    RLC meter with component selection functions

    Thiele and Small parameters calculation with Rdc reading

    Waterfall CSD and Cycle Wavelet analysis

    Clio Pocket system is supplied complete with accessories to start to get electro-acustics measurements on the go or in the laboratory, inside the box you find:

    – The CP-01 audio interface
    – The Clio Pocket SD card with software and drivers
    – The microphone MIC-02
    – One USB 2.0 cable
    – One RCA to RCA 2.7m long microphone cable
    – One RCA to alligators impedance cable