PRODUCT DESCRIPTION

The QCBOX Model 4 is a non-conventional unit designed to fulfill the needs of an electro-acoustical analyzer like the CLIO system. It can be configured, under software control, to assist frequency response or impedance measurements. In the first case it acts like a 50W power amplifier to drive the speaker or network under test while routing one-of-four inputs to the analyzer. The input can provide phantom power supply for Audiomatica MIC-01 or MIC-02 microphones. In the second case it presents the D.U.T.’s load across the analyzer’s input.
A dedicated output, ISENSE, allows impedance measurements in constant voltage mode as well voice coil current distortion analysis. A dedicated input permits an external foot pedal switch (or TTL signal) to be connected and trigger QC operations.
The QCBOX Model 4 finds use in laboratory or production lines setups.


19” RACK MOUNT ASSEMBLY

Using the Rack QC panel it is possible to assemble the QCBOX Model 4 together the SC-01 Signal Conditioner so that they can be mounted in a standard 19” rack frame.

 

 

TECHNICAL SPECIFICATIONS


LINE/MICROPHONE INPUT

OUTPUT:Power output stage with current sensing

INTERNAL SWITCHER

GENERAL

ACCESSORIES