PRODUCT DESCRIPTION

The HR-2000 PC board works as a precision two channels A/D D/A audio front-end for your IBM or compatible PC. The instrument grade input and output analog circuitry and its wide range of output attenuation and input gain allows an easy interface to the outer world; the two input channels can be controlled separately or as a single balanced one; switchable phantom supply lets you directly connect an Audiomatica MIC-01 or MIC-02 microphone to the HR-2000 input. Dual DMA handling permits both generation and acquisition to be performed in background giving maximum flexibility and ease of operation.

AVAILABLE SOFTWARE

CLIO 4.5 system software for MS-DOS or CLIOwin system software for Windows 95, 98, or Me (Windows 2000 or XP are not supported by the HR2000 ISA card; refer to the PB4281 PCI card).

 
 

 

 

 
 

TECHNICAL SPECIFICATIONS

GENERATOR: Two channels 16 Bit sigma-delta D/A Converter

Frequency range
1Hz-22kHz(+0-1dB)
Frequency accuracy
>0.01%
Frequency resolution
0.01Hz
Output impedance
100Ohm
Max output level (Sine)
12dBu (3.1Vrms)
Attenuation
0.1dB steps to full mute
THD+Noise (Sine)
0.015%

 

ANALYZER: Two channels 16 bit sigma-delta A/D Converter

Input range
+30 ÷ -40dBV
Max input acceptance
+30dBV (89.5Vpp)
Input impedance
64kOhm (5.6kOhm mic)
Phantom power supply
8.2V

 

PC SYSTEM RESOURCES

I/O address
300÷304 (or 310÷314) Hex
DMA channels
1 and 3

 

MISCELLANEOUS

Sampling frequency
51.2kHz÷1.6kHz
Card type
14cm. 8 bit ISA slot card
Card connections
four RCA plugs